Marine Parts Supply is hiring Parts Counter People. If you are interested click here!
 

Drive Oil Fill & Drain Screws

Mercruiser

Screw Kit, Lower Drain,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series. It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
10 79953Q04
SCREW-DRAIN @2
Instock $11.42
18-2244
DRAIN PLUG
Instock $4.65

Drain Screw and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
For: MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws
18-2244
DRAIN PLUG
Instock $4.65
10 79953Q04
SCREW-DRAIN @2
Instock $11.42

Drain Screw (Magnetic) and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
Note: Not to used on #1/R lower units
Fits: Mercury/Mariner O/Bs of Japanese origin that use an 8x1.25 metric threaded screw
Fits: Mercruiser I, R, MR, Alpha One, TR, TRS
18-2375
DRAIN PLUG MAGNET
Instock $8.82
22 8M0058389
SCREW KIT @2
Instock $16.14

Magnetic Drain Screw


Head Style: Slot Head
Fits: Cobra 2.3, 3.0, 3.8 & 5.8L (1986-95), V-6, V-4 (1979-Up), 60-75hp 3 cyl. 40/50hp (1989-98)
18-2378
MAGNETIC DRAIN SCREW
Instock $20.26
BRP318544
DRAIN SCREW
Instock $31.72

Screw Kit, 3/8-16 Drain/Fill Hole,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 8M0058389 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series.
It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the magnetic plug screw version - the magnet imbedded in the screw plug attracts any ferrous metal shavings to keep them from suspension in the gear lube and causing damage to gears
• Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive
22 8M0058389
SCREW KIT @2
Instock $16.14
18-2375
DRAIN PLUG MAGNET
Instock $8.82

Volvo

Oil fill plug


AQ280
AQ290, AQ290A, AQ290DP
SP-A, SP-A1, SP-A2, SP-C, SP-E
DP-A1, DP-A2, DP-B1, DP-C, DP-C1
DP-D, DP-D1, DP-E
DPX
D18179
OIL FILLER PLUG DRIVE
Order $65.10

Oil drain plug


AQ275, AQ275A
AQ280, AQ280DP, AQ280T
AQ285A
AQ290, AQ290A, AQ290DP
SP-A, SP-A/MT, SP-A1, SP-A2, SP-C, SPC1,
SP-E
DP-A, DP-B, DP-B1, DP-C, DP-C1, DP-D,
DP-D1, DP-E, DP-G
DPX, DPX-S, DPX-S1
D18354
OIL PLUG
Instock $69.83
D18355
OIL PLUG MAGNETIC
Instock $105.41

Oil drain plug


Magnetic
AQ275, AQ275A
AQ280, AQ280DP, AQ280T
AQ285A
AQ290, AQ290A, AQ290DP
SP-A, SP-A/MT, SP-A1, SP-A2, SP-C, SPC1,
SP-E
DP-A, DP-B, DP-B1, DP-C, DP-C1, DP-D,
DP-D1, DP-E, DP-G
DPX, DPX-S, DPX-S1
D18355
OIL PLUG MAGNETIC
Instock $105.41
D18354
OIL PLUG
Instock $69.83

Tohatsu

Drain Plug & Gasket


M8 - 1.25 thread
For: All Nissan/Tohatsu Models
18-72656
DRAIN PLUG & GASKET
Order $30.65

Johnson/Evinrude

Screw Kit, Lower Drain,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series. It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
10 79953Q04
SCREW-DRAIN @2
Instock $11.42
18-2244
DRAIN PLUG
Instock $4.65

Drain Screw


For: Cobra Drives & V-6 40-50HP (1989-97)
18-1236
DRAIN SCREW
Order $11.67

Drain Screw and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
For: MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws
18-2244
DRAIN PLUG
Instock $4.65
10 79953Q04
SCREW-DRAIN @2
Instock $11.42

Magnetic Drain Screw


Head Style: Slot Head
Fits: Cobra 2.3, 3.0, 3.8 & 5.8L (1986-95), V-6, V-4 (1979-Up), 60-75hp 3 cyl. 40/50hp (1989-98)
18-2378
MAGNETIC DRAIN SCREW
Instock $20.26
BRP318544
DRAIN SCREW
Instock $31.72

Lower Unit Drain/Fill Screw


Head Style: Slot Head
Fits: OMC V-6, V-4 (1979-Up), 60-75 hp 3 cylinder, 20-35 hp (1985-97)
18-2387
LOWER UNIT DRAIN/FILL SCREW
Order $11.33
BRP307551
DRAIN FILL PLG 10P
Instock $9.12

E-Tec Drain Screw w/ Magnet


Head Style: Allen Head
18-4249
E-TEC DRAIN SCREW W MAGNET
Order $19.75

E-Tec Drain Screw


Head Style: Allan Head
18-4255
E-TEC DRAIN SCREW
Order $6.39

OMC Sterndrive

Screw Kit, Lower Drain,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series. It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
10 79953Q04
SCREW-DRAIN @2
Instock $11.42
18-2244
DRAIN PLUG
Instock $4.65

Drain Screw


For: Cobra Drives & V-6 40-50HP (1989-97)
18-1236
DRAIN SCREW
Order $11.67

Drain Screw and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
For: MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws
18-2244
DRAIN PLUG
Instock $4.65
10 79953Q04
SCREW-DRAIN @2
Instock $11.42

Magnetic Drain Screw


Head Style: Slot Head
Fits: Cobra 2.3, 3.0, 3.8 & 5.8L (1986-95), V-6, V-4 (1979-Up), 60-75hp 3 cyl. 40/50hp (1989-98)
18-2378
MAGNETIC DRAIN SCREW
Instock $20.26
BRP318544
DRAIN SCREW
Instock $31.72

Lower Unit Drain/Fill Screw


Head Style: Slot Head
Fits: OMC V-6, V-4 (1979-Up), 60-75 hp 3 cylinder, 20-35 hp (1985-97)
18-2387
LOWER UNIT DRAIN/FILL SCREW
Order $11.33
BRP307551
DRAIN FILL PLG 10P
Instock $9.12

Yamaha

Magnetic Drain Screw


Thread: M8-1.25
18-2374
MAGNETIC DRAIN SCREW
Instock $24.34

Chrysler Outboard

Screw Kit, Lower Drain,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series. It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
10 79953Q04
SCREW-DRAIN @2
Instock $11.42
18-2244
DRAIN PLUG
Instock $4.65

Drain Screw and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
For: MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws
18-2244
DRAIN PLUG
Instock $4.65
10 79953Q04
SCREW-DRAIN @2
Instock $11.42

Force

Screw Kit, Lower Drain,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series. It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
10 79953Q04
SCREW-DRAIN @2
Instock $11.42
18-2244
DRAIN PLUG
Instock $4.65

Drain Screw and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
For: MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws
18-2244
DRAIN PLUG
Instock $4.65
10 79953Q04
SCREW-DRAIN @2
Instock $11.42

Drain Screw (Magnetic) and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
Note: Not to used on #1/R lower units
Fits: Mercury/Mariner O/Bs of Japanese origin that use an 8x1.25 metric threaded screw
Fits: Mercruiser I, R, MR, Alpha One, TR, TRS
18-2375
DRAIN PLUG MAGNET
Instock $8.82
22 8M0058389
SCREW KIT @2
Instock $16.14

Screw Kit, 3/8-16 Drain/Fill Hole,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 8M0058389 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series.
It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the magnetic plug screw version - the magnet imbedded in the screw plug attracts any ferrous metal shavings to keep them from suspension in the gear lube and causing damage to gears
• Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive
22 8M0058389
SCREW KIT @2
Instock $16.14
18-2375
DRAIN PLUG MAGNET
Instock $8.82

Mercury/Mariner

Screw Kit, Lower Drain,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 79953Q04 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series. It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
10 79953Q04
SCREW-DRAIN @2
Instock $11.42
18-2244
DRAIN PLUG
Instock $4.65

Drain Screw and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
For: MerCruiser I,R,MR,Alpha One,TR,TRS & all O/Bs with 3/8-16 non-magnetic gear lube fill or vent screws
18-2244
DRAIN PLUG
Instock $4.65
10 79953Q04
SCREW-DRAIN @2
Instock $11.42

Drain Screw (Magnetic) and Gasket Set


Thread Size: 3/8" or 9.5mm - 16
Note: Not to used on #1/R lower units
Fits: Mercury/Mariner O/Bs of Japanese origin that use an 8x1.25 metric threaded screw
Fits: Mercruiser I, R, MR, Alpha One, TR, TRS
18-2375
DRAIN PLUG MAGNET
Instock $8.82
22 8M0058389
SCREW KIT @2
Instock $16.14

Magnetic Drain Screw


Head Style: Slot Head
Fits: Cobra 2.3, 3.0, 3.8 & 5.8L (1986-95), V-6, V-4 (1979-Up), 60-75hp 3 cyl. 40/50hp (1989-98)
18-2378
MAGNETIC DRAIN SCREW
Instock $20.26
BRP318544
DRAIN SCREW
Instock $31.72

Screw Kit, 3/8-16 Drain/Fill Hole,


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 8M0058389 is used with 3/8 - 16 drain/fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series.
It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 3/8-16 drain and fill hole screw on all MerCruiser sterndrives, Mercury and Mariner outboards except the Verado series
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the magnetic plug screw version - the magnet imbedded in the screw plug attracts any ferrous metal shavings to keep them from suspension in the gear lube and causing damage to gears
• Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive
22 8M0058389
SCREW KIT @2
Instock $16.14
18-2375
DRAIN PLUG MAGNET
Instock $8.82

Not Categorised

8M0083059 Lower Unit Gear Lube Drain and Fill Hole Screw And Seal - Non-Magnetic


Lower Unit Gear Lube Drain and Fill Hole Screw and Seal 8M0083059 is used with 8x1.25 metric drain/fill hole screw on all Mercury and Mariner outboards made in Japan.
It is very important to use the seal to make sure the drain/fill hole screw seats properly to retain the gear lube in the gear case and keep damage causing water out of the gear case.


• Used with 8x1.25 metric threaded drain and fill hole screw on all Mercury and Mariner outboards made in Japan
• Must use this seal to properly seat the drain/fill hole screw in the lower unit
• Helps prevent gear lube from leaking out and water from seeping in to the gear case causing serious damage
• This is the non-magnetic plug screw version
• Produced to meet Mercury Marine original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive
22 8M0083059
SCREW KT QS @2
Order $22.06
22 81924M
PLUG @5
Instock $22.96